Chainsaws are handy tools used to cut through wood, but they can also be dangerous if not well maintained, and require careful use. Chainsaw parts need frequent maintenance and often need replacing with new parts when the old ones are too damaged or worn down, in order to stay safe. This article will teach you how to replace your chainsaw chain without any special equipment.
If you have an electric chainsaw, the “how to put a chain back on an electric chainsaw” is easy. Just follow these steps and you should be good to go.
The Steps to Putting a Chain Back on a Chainsaw
- Clean the bar and chain first. Make a thorough cleaning of the chainsaw’s bar and chain before reinstalling it.
- Step 2: Remove the components.
- Step 3: Reverse the chain until the desired tension is achieved.
- Step 4: Make sure it’s at the proper tension.
- Step 5: Double-check and troubleshoot.
As a result, which direction does a chainsaw’s chain go?
When changing the chain on your chainsaw, one thing I would add is to make sure the cutting portion of the chain is facing the appropriate way. Unfortunately, the chain will go on either way, but it will not cut if you put it on backwards.
What’s more, why does the chain on my chainsaw become so dull so quickly? It’s possible that you’re cutting the cutters at too high an angle, which can cause them to dull fast. Your rakers can be too far down, resulting in a fast dulling chain. It’s possible that you’re chopping filthy wood. With the tip of the bar, you may be softly touching the ground.
What causes a chainsaw chain to fall off was also a question.
There are many possibilities, but the most probable is that your chain tension is too loose. The end of the chain may whirl about and injure your right hand if it falls off but stays in the driving sprocket. The chain tensioner on most saws works by pushing the bar forward and tightening the chain using a screw.
When tightening a chainsaw chain, how tight should you go?
A correctly tensioned chainsaw chain should still be somewhat loose on the chainsaw guide bar, but not so slack that the drive links can be pulled out of the bar nose.
Answers to Related Questions
When should I change the chain on my chainsaw?
When Should a Chainsaw Chain Be Replaced?
- Teeth have been fractured or are unevenly worn.
- Tension issues with the chain.
- When cutting, there is smoke.
- Sawdust is left behind instead of coarse chips.
- When in operation, the chainsaw seems unstable, slices unevenly, and rattles.
How can I tell if the chain on my chainsaw is dull?
Even when the chain lubrication is in good operating condition and the chain tension is proper, smoke appears. Because the chainsaw only cuts in one direction, the cut is skewed. This indicates that one side of the chain has dull cutting teeth or that the lengths of the cutting teeth are unequal. During the cut, the chainsaw “rattles” and “bounces.”
What is the best way to sharpen a chainsaw chain?
Adjust the height of the depth gauges on the chain using the depth gauge tool and file. The cutters can’t reach the timber if the depth gauges are too high. When you refill your chainsaw with gas, re-sharpen your chain. When cutting, keep your chain off of the soil or it will rapidly dull.
What’s the difference between chainsaw chains and chainsaw blades?
Sharp cutting teeth on the exterior of the chain loop and flat driving links on the inside keep the chain on the saw’s bar and enable the engine or motor to propel the chain. Wood is chopped by saw chains (and chainsaws in general).
Is it possible to extend the bar on my Stihl chainsaw?
Is it possible to extend the bar on a chainsaw? Yes and no are the answers. Many chainsaws are designed to accept a variety of various size units. The Husqvarna 460 Rancher, for example, is often marketed with a 20-inch bar and chain.
What chain size does my Stihl chainsaw require?
Chains from Stihl are normally sold in one of three pitch sizes: 3/8-inch,. 325-inch, or. 404-inch. Stihl use a coding scheme that consists of a single number or letter and identifies the features of the chain.
What’s the deal with my chainsaw smoking?
A chainsaw should not smoke, but if it does, it might be due to the chainsaw overheating, the fuel mix holding too much oil, or the chain not being sharp enough or receiving enough lubrication. A burning chainsaw, in other words, is a solid indicator that something isn’t quite right.
How do I know which Stihl chain I have?
What to Look for in a Chain Saw Chain Length on a Stihl
- Look for the Marketing Number imprinted on the chain’s side.
- Locate the first number in the Marketing Number imprinted on the side of the chain to determine the chain’s pitch, which is the distance between three rivets divided by two.
- Locate the number inscribed on the drive link to determine the chain gauge.
What chain size does a Stihl ms170 take?
Stihl MS170 MS180 55 Link 43 Gauge Chainsaw Chain 16″
How do you replace the blade on a chainsaw?
- Remove the old chainsaw chain first.
- Step 2: Let go of the tension in the chain.
- Remove the old chainsaw chain in the third step.
- Step 4: Remove the Tensioning Screw and loosen it.
- 5th Step: Attach the New Chain to the Saw.
- Align the Guide Bar in Step 6.
- Step 7: Replace the Side Plate with a new one.
- Step 8: Adjust the Chain Tension to the Correct Level.
When should you replace a Stihl chainsaw bar?
Recommendations from Stihl
Although Stihl suggests turning the chain saw chain bar over every time you sharpen or change the saw, the bar will eventually wear out and you will need to replace it. However, flipping the bar on a frequent basis increases its life by forcing it to wear equally on both sides.
Is it possible to overtighten a chainsaw chain?
On the chainsaw, there is a tension screw towards the base of the bar. Turn the chain clockwise to tighten it, and counterclockwise to release it. Avoid overtightening the chain, since this may cause it to break. The video below from Echo shows how to change chain tension properly.
How many times can a chainsaw chain be sharpened?
However, in excellent condition, you may sharpen your chainsaw chain 3 to 5 times.
Why isn’t the chain on my chainsaw tightening?
To tighten the chain, turn the tension control screw to the right, and to relax it, turn it to the left. You may be unable to tighten the chain because you attempted to crank the tension screw without first loosening the nuts. When the chain is appropriately adjusted, tighten the bolts back into place.
Do you need a chainsaw license?
Although there is no legal need for training, the HSE will punish anybody who uses a chainsaw for work without the necessary training and personal protective equipment (PPE). Other related concerns include LOLER equipment inspections, PUWER rules, and risk assessments.
Why does the chain on my Stihl chainsaw constantly falling off?
The chain of a chainsaw may come loose for a variety of reasons. The most typical reason for this is because it is overly loose. Side play may derail the chain if the bar is towards the end of its life and the chain is also worn. Last but not least, the chain may not be suitable for the bar, drive sprocket, or both.
On a chainsaw, how tight should the chain be?
A correctly tensioned chainsaw chain should still be somewhat loose on the chainsaw guide bar, but not so slack that the drive links can be pulled out of the bar nose.
You can download your Stihl chainsaw manuals if you’re still struggling on how to operate it.
