Top coat is a very important step in the process of painting furniture, walls and other surfaces. It prevents your paint from absorbing moisture or letting it dry out while it seals the surface so that water can’t penetrate. Top coats are available as aerosol cans, liquid spray-on finishes, brushes and rollers depending on what you’re using them for
General Finishes high performance water based top coat is a satin finish. It comes in a variety of colors and can be applied to any surface.
Use as directed:
Before applying a water-based topcoat, oil-based stains must be totally dried. Before using General Finishes High Performance, wait at least 48 hours. Apply the paint using a foam brush or a paint pad applicator. Apply generously with the grain, using smooth, even strokes.
In light of this, how do you apply a water-based topcoat on general finishes?
Step 2: How to Apply High-Performance General Finishes
- Hand application: Using a synthetic bristle brush, foam brush, pad applicator, or roller, such as Whizz or AllPro Velour brand, apply a generous quantity of product.
- Spray application: Strain topcoat through a fine-mesh filter before spraying.
Is it necessary to sand between applications of water-based Poly? If the duration between applications is shorter than 6 hours, sanding between coats is not necessary for adherence. Screening or sanding between layers, on the other hand, generally results in a smoother, better-looking surface. A minimum of three coats of finish is suggested. On the same day, do not apply more than two coats.
Apart from that, how should water-based polyurethane be applied?
Using a pad, apply the water-based polyurethane. Water-based poly dries quicker than oil-based poly, making it even more difficult to brush across a large area. A paint pad is the answer, since it applies poly quickly and smoothly. Simply dunk the pad in the poly and drag it over the surface.
What are some of your favorite ways to utilize general finishes?
The Use of General Finishes Top Coats with a Water Base Use a foam brush, a latex paint pad applicator, or spray to apply. Apply Top Coats generously in the direction of the grain, using smooth, equal strokes. Make sure you have enough material to make a wet film. Don’t brush too hard!
Answers to Related Questions
Is it possible to apply General Finishes top coat over wax?
No, General Finishes Milk Paint does not need to be sealed, particularly for low-use items like a coffee table. For longevity and performance, General Finishes prefers top coats over waxes. To complement the Milk Paints, General Finishes offers a High Performance Top Coat and Glaze Effects.
Is it possible to roll on water-based polyurethane?
You can dip directly out of the can if you’re simply using a brush, but if you’re going to use a roller, pour the poly onto a tray first. Because of the short drying period, overworking with a roller or brush interrupts the chemical reaction in oil-based poly and generates streaks in water-based poly.
How long does it take for a top coat of general finishes to dry?
Under optimal circumstances (70° and 70% humidity), drying time is typically 2-4 hours. Dry time will be extended to 8-10 hours if the temperature is cooler or the humidity is greater. Water-based coatings must be applied at temperatures higher than 65 degrees Fahrenheit.
Should I coat the stain with polyurethane?
It is totally up to you whether or not you apply a polyurethane finish on stained wood, and I cannot state that you are “required” to do so. However, you may do so as long as the stain finish is completely dry before applying the polyurethane topcoat.
What is the best way to apply general finishes gel top coat?
Using a cloth, natural bristle brush, foam brush, staining pad, or pad applicator, apply three thin layers of Gel Topcoat. The applicator required grows in size as the surface becomes bigger. Additional coatings will not make the surface more durable. Remove a tiny bit of the finish and spread with a gentle motion.
How long does it take for water-based polyurethane to dry?
Time it takes for water-based polyurethane to dry:
Shoes and bare feet should be avoided. Also, at this time, make sure your dogs aren’t walking on the flooring. You may return the furniture after two days. Because it takes 30 days for the floors to cure, it’s best to wait that long before placing area rugs on them.
With General finishes, how do you flatten a flat finish?
Flat Out Flat Application Steps for General Finishes
- Before and throughout the application process, stir topcoat to include particles that have accumulated to the bottom of the container.
- Apply three coats of paint.
- Thin topcoat with 10-15% distilled water or General Finishes Extender if required.
- It’s best to use no more than three coats.
What is the best way to apply polyurethane without leaving brush marks?
After sanding, a light layer of finish conceals the damage.
- With the fine-grit sandpaper, softly sand down the brush markings.
- To eliminate any traces of dirt and grit from the sanding, wipe it off with a soft cloth.
- Apply a light coat of polyurethane finish to the brush, wiping away any excess.
What is the most effective method for applying polyurethane?
Using a tiny brush, foam pad, or cloth, apply a very thin layer of polyurethane. To prevent elevating the grain, work with it and don’t use too much polyurethane. After the first application has dried for a couple of hours, you may add a second coat.
What kind of polyurethane roller should I use?
Options for Rollers
Preventing lint and dust from becoming mixed into the final surface is one of the most difficult aspects of applying polyurethane. Your hardwood floor will be smoothed out using short fiber paint rollers and lambswool paint rollers.
Is water-based polyurethane as effective as oil-based polyurethane?
Oil-based polyurethanes have an amber glow and need fewer applications than water-based polyurethanes. Both water-based and oil-based polymers provide enough protection; the main difference is in appearance. It is, in fact, the most long-lasting hardwood floor finish. If you want to keep the maple’s natural appearance, use a water-based (waterborne) polyurethane.
Is it possible to roll on polyurethane?
Yes, you may apply polyurethane with a paint roller. Polyurethane dries rapidly and is easy to apply using a paintbrush or roller. Using a roller to apply the substance minimizes brush strokes and lines while also preventing over-application.
How can you tell whether polyurethane is completely dry?
There are a few different techniques to tell whether a surface is dry: If an oil-based product is no longer sticky and has no odor, it is considered dry. WATER BASED PRODUCTS should be tried if they no longer feel cool to the touch and gentle sanding produces a powder.
When it comes to polyurethane, how long should you wait between coats?
Coats Between Coats
Brush polyurethane down the grain, extending it into as thin a layer as possible. Let 24 to 48 hours for polyurethane to dry before sanding to allow the surface to cure and set.
How long does water-based polyurethane take to stop stinking?
The floor should be substantially cured (enough to live on) in the first 5-7 days, but the scents may take up to a month to entirely disappear and the finish to attain its optimum hardness. The first few days should be spent “airing out” the residence.
Which polyurethane is the best?
The best polyurethane is Minwax Water Based Oil-Modified Polyurethane, which is ideal for anything you need to coat around the house. Because it’s water-based, it emits less fumes and cleans up quickly with warm water. It’s also an excellent polyurethane since it comes in a variety of sheens, including gloss, semi-gloss, and satin.
With polyurethane, how do you get a matte finish?
Wipe-On Varnish or Oil Hand Rub
Using a hardening oil, such as tung oil, to change the sheen from high gloss to satin or matte is a nice method to achieve it. Scuff it with 220-grit wet/dry sandpaper after applying a base coat of gloss water- or oil-based polyurethane. Apply a second layer if necessary.
